Shrink Wrapping Machine Mineral Water Parcels - juices - edible oil

. High quality Egyptian industry.

• External specifications of the product:

• • Heat shrink packaging system with two holes on both sides of the package.

• • The possibility of packing products without a carton base in case there is a fixed base for the product on the machine.

• Roll Packaging Specifications:

• • The machine is provided with 2 / upper / lower thermal polyethylene encapsulation packaging.

• • The machine is equipped with roller supports with leader to ensure the stability of the packaging roll.

• • The largest outer diameter of the packaging roll is / 40 / cm, the smallest inner diameter of the roll is / 7.6 / cm

• Machine productivity

• Average productivity of the machine / 200 / hourly package.

• • The productivity of the machine depends on the size of the parcel, the quality of the polyethylene paper and the thicknesses used.

• Standard Specifications:

• Packaging mechanism.

• The machine is made of galvanized iron.

• Automatic parcel feeder equipped with a front push-up handle to place the parcel works by pneumatic piston.

•  Existence of optical sensors to ensure that the package stops in the place specified for it.

•  The cutting mechanism operates on compressed air (automatic) and equipped with a continuous welding device, the welding temperature is controlled via a digital screen and equipped with a cutting knife.

• Roller feed mechanism and it consists of the following components:

• Drive to unroll the Upper Roller.

• Mechanical and electronic mechanism to ensure the machine is automatically fed to the roller.

• The cutting and welding mechanism consists of the following components:

• Pneumatic mechanism for moving the cutting and welding board with speed and time control.

• Thermal knife for cutting and welding operations with the ability to control its temperature with an electronic thermal controller.

• The cutting and welding board is equipped with springs to ensure complete cutting.

• The ability to control the cutting and welding time by means of a timer.

• The machine is equipped with a conveyor belt after the cutting and welding mechanism to ensure the package enters the packing tunnel within a specified system.

• The machine is equipped with a furnace (thermal tunnel) within the following specifications:

• The size of the tunnel opening is 40 cm high x 60 cm wide x 150 cm long.

•  The heating is done by heaters with the ability to determine the required temperature by a digital electronic thermostat

•  The tunnel is equipped with a chain to move the product.

• Control phrase:

• Side control panel contains.

• Automatic start and test switch.

• Digital screens to control all machine movements and the longitudinal and transverse welding temperature.

• Emergency stop switch.

• All of the circuit breakers and machine-installed contactors are French made by Schneider.

• The speed of the machine is controlled by a Korean industry inverter.

• Grounding connection (discharge the charge) of all electrical devices.

• Machine Metal:

• All surfaces that are in contact with the packaging material made of stainless steel SS304.

• Machine body is steel coated with thermal painting.

• Working conditions:

• Electrical feeding: 220V 50-60 Hz.

• Compressed air: 2 cubic meters, pressure 8 bar.

• Ambient temperature: 10-40 ° C, operating in temperatures above that should be avoided.

• Ambient humidity: 10--90 non-condensing.

• Warranty: One year against errors caused by improper manufacturing, starting from the date of receiving the machine.

• Business terms:

• All equipment is guaranteed for 12 months, life-long after-sales service.

• Installation and operation: After the machines arrive at your factory, we can, upon your desire, send an expert in order to do the installation and operation of the machines and train the workers as your guide for operating the line.